Note: The product in this link is a graphics card water cooling kit, not a graphics card. The integrated water cooling needs to be purchased separately and can be matched freely. 2: Does the water cooling kit support video memory and power supply for heat dissipation? The water cooling kit adopts the core direct contact + video memory integrated copper bottom heat dissipation design, and the heat of the video memory is carried away through the cold head contacted by the copper bottom. The heat sink is only responsible for cooling the power supply. When installing, the video memory and power supply must be attached to the thermal pad. 3: How to solve the high temperature after installation? The water cooling kit adopts the core direct contact scheme. If the temperature is abnormal, it is recommended to disassemble the cold head and observe the coverage of the copper bottom silicone grease of the cold head. If there is too much silicone grease in the core area, it means that there is a problem with the installation of the cold head. Solution 1: Whether to use the copper column correctly (the copper column is determined according to the height of the buckle) Some brands (such as Limin IDCOOLING) can be installed directly with cold head screws. You can try to install without the copper column before all installation. If the installation fails, use the copper column again. Solution 2: Reinstall the kit once, and pay attention to whether the heat conducting pad is pasted incorrectly. There is no abnormality in the core contact, please check whether the water cooling is working normally. Pull up the fan speed of the cooling head, the temperature does not improve, and the temperature of the cold exhaust of the water-cooled tube is low. Please replace it and try other water cooling. The chassis air duct design is unscientific, and the cold exhaust hot air cannot come out. Try to place the cold exhaust outside the chassis, and then consider solving the chassis air duct problem if the temperature is normal. 4. After the installation is completed, the hot spot temperature of the baking machine is high It is recommended to reinstall the cold head to solve the problem. Install the four screws of the cold head and slowly screw them diagonally to ensure that the four corners are evenly stressed. 5. What is the difference between the Standard Edition and the Premium Edition? The standard version does not distinguish the power supply direction and supports mainstream integrated water cooling brands. The exclusive version adds a wind hood and a modified cold head shell. But it can only be adapted to Limin AE and FM series water cooling. 6. How to distinguish between top power supply and side power supply 7. How to apply heat pads The store has made a separate logo for the thermal pad for various purposes. After receiving the goods, stick the thermal pad according to the corresponding logo to install it. Remember to tear off the thermal pad film when installing.

مواصفات المنتج