1. Charge Upon power-on, the current battery level will be displayed for 5 seconds. Solid green = 75%-100% Flashing green = 50%-75% Solid red = 25%-50% Flashing red = 1%-25% When charging: Solid red = Charging in progress Solid green = Fully charged No Battery Installed = Alternating Red & Green Flashing Low Battery Indicator: When the battery level is low, the indicator will automatically flash red to signal low power. Low Voltage Protection: When the flashlight is on and the battery level becomes too low, the flashlight will automatically power off to protect the battery lifespan. Temperature Control Protection: During operation, when the flashlight temperature reaches the preset threshold, it will automatically reduce output to regulate temperature. 2. Change Modes Click the Hall-effect switch to cycle through modes in sequence: OFF → Spotlight → Floodlight → Red Light. 3.in Spotlight/Floodlight Mode: Eco/Low/Medium /High, In Spotlight / Floodlight mode, press*1 the touch button to cycle through brightness levels in sequence: Eco → Low → Medium → High. 4.In spotlight/Floodlight Mode: Turbo/Hybrid Beam/steplessDimming In Spotlight / Floodlight mode: Press*2 the touch button to enter Turbo of the current mode. Press*2 again to enter Turbo of Hybrid Beam (Spot + Flood). Press*1 again to return to the memorized brightness of the current mode. Stepless Dimming: Press & hold the touch button to perform stepless dimming. The light will flash once quickly when reaching the max brightness; there is no indication at the lowest level. After releasing the button, press & hold again within 1 second to reverse the dimming direction; otherwise, the direction remains unchanged. 7.In Red Light Mode: Low/Medium/High In Red Light mode, press*1 the touch button to cycle through brightness levels in sequence: Low → Medium → High. 8. In Red Light Mode: Red Flashing / Stepless Dimming Press*2 the touch button to enter Red Flashing. Press*1 again to return to the memorized brightness level. Press & hold the touch button to perform stepless dimming. When reaching the max brightness, the light will flash once quickly as an indication; there is no indication at the lowest level. After releasing the button, press & hold again within 1 second to reverse the dimming direction; otherwise, the dimming direction remains unchanged.

مواصفات المنتج