4/8/20W Mosquito Killer Lamp 110V/220V Electric Insect Killer Electric Pest Repellent UV & LED Lamp Powerful Bug Electric Mosquito Killer Flycatcher Mosquito Killer Lamp 110V/220V Electric Insect Killer Electric Pest Repellent UV & LED Lamp Powerful Bug Electric Mosquito Kill 20W Electronic Indoor Insect Killer DL-4W: ① Power: 4W, ② Output high voltage: 1300V ③ LED with phosphor tube light source ④ Grid: 3MM salt spray electroplated double-layer mesh after 48 hours, ⑤ External network: 3MM electrophoresis black, ⑥ Chain: salt after 48 hours Mist plating DL-8W: ① Power: 8W, ② Output high voltage: 1300V ③ LED with phosphor tube light source ④ Grid: 3MM salt spray electroplated double-layer mesh after 48 hours, ⑤ External network: 3MM electrophoresis black, ⑥ Chain: salt after 48 hours Mist plating DL-20W: ① Power: 20W, ② Output high voltage: 1500V, ③ Lamp tube: T8-UV, ④ Lamp holder: PC with certified lamp holder, ⑤ Circuit board: with overload protection, 100% flame retardant material, passed 5500 times The switch is aging, ⑥Power grid: 3MM double-layer network with salt spray plating after 48 hours, ⑦External network: 3MM electrophoresis black, ⑧Chain: Salt spray plating after 48 hours --How to install the lamp？ 1. Disassemble the black net and take out the foam and lamp tube 2. Put the lamp into the bayonet 3. 90 degree rotating lamp 4.Press the net to complete the installation --What to do if the lamp does not light up？ 1. Use a tool to open the cover on the side with the power cord 2. Check if the line is loose after opening 3. If the lamp does not light up, pull out the wire connecting the lamp 4. Finally, connect the lamp tube back --What to do if the grid is out of power？ 1. Use a tool to open the cover on the side with the power cord 2. Check if the line is loose after opening 3. In this case, the wiring connect to the grid is loose 4. Use tools and screws to connect the wire back

مواصفات المنتج