Specification : Condition: NEW Material: Aluminum Amperage: 120 A Voltage: 12 V Rotation: Clockwise Engine: L4 2.5L Number of Grooves: 6 Part Numbers: 11648N, 11648, 211648, 849149, 11180, N11648, 231004BA0A, 231004BA0B, TG12C152 Fitment : For Nissan Rogue 2014-2019 L4 2.5L For Nissan Rogue 2020 bL4 2.5L Japan / Korea / USA Built Vehicle (120 Amp/12 Volt, CW, 6-Groove Clutch Pulley) Attention : -How to Replace Alternator? 1. Disconnect the negative battery cable; 2. Take off the intake hose, mass airflow sensor, and air filter; 3. Loosen the belt tensioner; 4. Remove the belt from the pulley; 5. Loosen and remove the alternator; 6. Remove dust and oil from the installation position; 7. Install the new alternator; 8. Replace the bolts, and reattach all connections; 9. Reinstall the belt; 10. Connect the intake hose and reinstall the mass airflow sensor; 11. Reconnect the negative battery cable -What to do If the Alternator Makes A Noise? 1. If the noise occurs in the speed change stage of the car alternator, first check the alternator belt, and adjust or replace it. 2. If the noise mainly occurs in the front and rear parts of the car alternator, there may be a problem with the bearing lubrication of the alternator. 3. If the noise mainly occurs in the middle of the car alternator and a clear vibration sense can be observed, there is friction between the stator and rotor of the car alternator.The alternator can be disassembled for adjustment or component replacement. Note: Not sure if this will fit your car please send us your VIN before ordering to verify compatibility.

مواصفات المنتج