ورق جدران ثلاثي الأبعاد بتأثير طين الدياتوم للجدران

Product information : Function: beautify wall decoration Material: non-woven fabric Level composition: 3 levels Construction steps (please read the following carefully before construction) 1. Preparation: prepare pots or buckets, tape measure, utility knife, rags, sponges, scrapers, brushes and other utensils. 2. Wall and base film treatment: Keep the wall clean and flat, paint the diluted base film (see the instructions for the base film for the dilution ratio), and then paste the wallpaper after it has dried out. 3. Mixing glue: add appropriate amount of water and stir the glutinous rice glue (for the water ratio, please refer to the instructions for the glutinous rice glue) until the viscosity of the glutinous rice glue is suitable. 4. Check and cut wallpaper: Before construction, carefully check whether the model, batch number, and quantity of the wallpaper are correct, and cut the wallpaper according to the height of the wall plus 2-3cm. (Color paper needs to be cut after the flower) 5. Wallpaper brushing glue: spread the adjusted glue evenly on the back of the wallpaper, and fold the painted wallpaper in an s-shape. (Note: Non-woven wallpaper is directly glued to the water wall) 6. Paste the wallpaper: When pasting the wallpaper, spread it out from top to bottom and left and right. For the flower wallpaper, you need to pay attention to the flower level. Use a scraper to flatten the wallpaper, and cut off the extra part of the wallpaper. Packing list : Wallpaper*1

مواصفات المنتج