Compact and Lightweight 1. High-frequency DC high voltage is used to improve the quality and quantity of X-rays, reduce theX=ray radiation dose absorbed by doctors and patients, and protect the health of doctors and patients 2. The small-focus X-ray tube is used to obtain clearer images, and the filament preheating can extendthe life of the X-ray tube. 3. The microcomputer control box is used, and the best exposure control can be achieved by pressingthe corresponding standard graphics. 4. Lightweight design, handheld structure, ergonomic requirements, simple operation, easy to camy andplace. 5. lt uses direct cument and is powered by a rechargeable lithium battery pack6. intended use. Used for X-ray photography of teeth to obtain images for clinical diagnosis Technical Parameter charger Input Voltage 100V-240V～ Phase Single Phase Frequency 50Hz/60Hz Output Voltage 25.2V ⎓ Output current 1.0A Battery Nominal Voltage 21.6V ⎓ Charging Voltage 25.2V ⎓ Capacity 3000mAh X-ray source components and Rated Capacity Nominal tube voltage 70kV(±10%) Tube Current: 2mA(±20% ) Nominal Power 70kV 2mA 0.1s 0.14kW Nominal continuous power 60W Operating frequency ≥20kHz Loading time range : The grading adjustment is selected according to the R10 series 0.10s-2.00s The grading adjustment selected according to the R10 series，(±5%) Focus nominal value 0.4 Target material & inclination Tungsten target 12° Total filtration 2.0mmAl X-ray source components andcontrol components Focus to skin distance ≥200mm Useful beam diameter at the end of the beam limiter Φ60mm Filming per Hour 20 times Temp switch 55℃ Focus position deviation ±2.0mm Radiation output limit Manual switch, stop loading at any time, beep stops loading Safety Category by protection level against liquid IPX0 by safety level when used in the presence of flammable anesthetic gas mixed with air or flammable or nitrous oxide Cannot be used in the presence of flammable anesthetic gas mixed with air or flammable anesthetic gas mixed with oxygen or nitrous oxide Cannot be used in the presence of flammable anesthetic gas mixed with air or flammable anesthetic gas mixed with oxygen or nitrous oxide By Operation Mode Intermittent loading, continuous operation mode Ambient Requirement Temp condition Transportation and storage:-10 ℃～ 40℃ operation：10℃～35℃ Relative humidity range Transportation and storage：≤80% operation：45% - 75% Atmospheric pressure range Transportation and storage：500hPa～ 1060hPa operation：700hPa～1060hap

Product specifications