2.4Ghz 2W WiFi Bluetooth Sweep Signal Source VCO RF Generator RF Power Amplifier For 2.4Ghz BT Headset Music Speaker Wifi Camera Very simple to use Step 1: Insert 2.4G antenna and tighten it Step 2: Insert the DC5V 1-2A power supply (Please do not use fast charging sockets) Refer to our testing video Only supports 2.4G devices Does not support dual band WIFI only can work 2.4Ghz wifi frequency or 2.4G Bluetooth Note: The antenna must be plugged in first. Otherwise, the power amplifier will be burned out due to the excessive standing wave. And the antenna frequency must be matched PS: if long distance is required, please use directional antenna : about interference distance 0-15M INPUT voltage : type-c USB 5V 1A-2A DC (Please do not use fast charging sockets) Input power: about 10W Output power: 32~33dBm Output interface: SMA outer screw inner hole Size: length*width*height (without connector)=10*5*4cm Remarks: Before powering on the 2.4G antenna, it is recommended to add air cooling when working for a long time.

Product specifications