High Voltage Compatibility Operating at 72V, this motor kit is compatible with high voltage systems, providing ample power for your electric vehicle. High Power Output With a powerful 3000W output, this electric brushless DC motor kit ensures efficient performance for e-scooters, e-bikes, e-cars, and motorcycles. Safe Operation Designed with high-concerned chemicals-free components, this motor ensures safe and reliable operation. Versatile Application This motor kit is versatile, suitable for a range of electric vehicles including e-scooters, e-bikes, e-cars, and motorcycles. High Disk Motor The high disk motor provides robust torque, enhancing the overall driving experience for various electric vehicles. About Motor: 1.Model:MY1020 2.Motor Type:High-Speed BLDC brushless DC Motor 3.Current:42A 4.Out put /W:3000W 5.Rated Speed:6500rpm/min 6.Weight:4.7KGS 7.Diameter:95mm 8.Rated Torque/N.m:5.4N.m 9.Applicable:Electric Scooter,Ebike,Folding Bike,Small E-Moto,machine,MIni Electric Car ,DIY kit 10Installation: Center,MID DRIVE 11.Application Chain:T8F Sprockt /Chain 36V-84V 2000W-3000W square wave brushless controller： Rated Voltage: 36V-84V Rated Power: 2000W-3000W Limit Current: 60A Number of brushless controller tube：18 Weight：1000g Brushless controller function： 1.low level brake 2.speed control handle（throttle） 3.cruise 4.hall 5.reverse gear 6.PAS 7.high level brake 8.intelligent recognition（self-learning） 9.phase meter 10.hall meter 11.three speed gear 12.electric door lock（must connect） 13.anti-theft alarm signal（is connect to alarm，if not have alarm，not need connect） 14.anti-theft alarm power（is connect to alarm，if not have alarm，not need connect） 15.multiple data meter 16.motor phase line 17.battery How to connect controller？ 1.connect the motor phase line(color to color） 2. connect the hall line,color to color connect.(if motor without hall line, don't need connect,but motor run have noise) 3. connect the battery line(red:battery+ , black:battery-) 4. connect the controller throttle to throttle and need color to color connect, connect controller electric door lock to throttle electric door lock,or call key lock） （if throttle not have electric door lock,let controller 2 wires electric door lock short） 5.off power,let two intelligent recognition lines connect together,open power,then the wheel will forward or reverse. (1.if wheel forward ,Separate the intelligent recognition line. 2.if wheel reverse, Separate the intelligent recognition line. Let intelligent recognition line connect together again, if wheel forward ,Separate the intelligent recognition line.) This step is self-learning of the controller, which is to enable the controller to achieve better performance compared to the motor and battery voltage. The direction of motor operation can also be adjusted. This step needs to be effective within 2 minutes after the power is turned on. If the timeout occurs, please turn off the power and then turn it back on before proceeding with these steps. NOTE:when use throttle control speed,two intelligent recognition line must separate. 6.other functions can be connected as needed. note：Forward gear can use three gears, low, medium, and high, while reverse gear only has one low speed.and when use pedal throttle,controller 3speed function not work.

Product specifications