Product Details: Our 3D Hand Mold Clone Powder contains seaweed extract, gypsum, and silica clay. It strengthens bonds and promotes communication between people. Its usage is simple: 1. Prepare the clone powder, water, and other materials. 2. Pour the water into a container. 3. Then pour the clone powder into the container while stirring, and stir for 60 seconds until evenly mixed. 4. After clenching your fist, place it into the clone powder (note: keep it vertical and avoid touching the sides). It can also serve as a meaningful commemorative gift. Our 3D Hand Mold Set contains seaweed extract, gypsum, and silica clay. It strengthens bonds and promotes communication between people. Its usage is simple: prepare the clone powder and room-temperature water (powder-to-water ratio of 1:5) and pour them into a bucket, stirring evenly until there are no particles. Pour the clone powder into the bucket all at once and stir quickly within 60 seconds. Put your hand into the clone powder liquid and keep it still for about 5 minutes (be careful not to touch the bottom of the bucket). Wait for the liquid to solidify into a mold (after the model is complete in about 5 minutes, you can move on to the next step), then gently wiggle your arm to let air in and slowly pull your hand out. After curing, pour the whole thing out, break off the excess material, and gently remove the hand mold. After it has fully set, pour it out as a whole, break off the excess material, gently remove the hand mold, and trim it slightly with our tool (bamboo stick and sandpaper) to make the model more beautiful. Selling Points: ① 3D Hand Mold Clone Powder contains seaweed extract, gypsum, and silica clay; ② Strengthens bonds and promotes communication between people; ③ Pour the clone powder into the container while stirring, and stir for 60 seconds until evenly mixed; ④ After clenching your fist, place it into the clone powder (keep vertical and avoid touching the sides); ⑤ A meaningful commemorative gift ① 3D Hand Mold Set contains seaweed extract, gypsum, and silica clay; ② Strengthens bonds and promotes communication between people; ③ Pour the clone powder into the bucket all at once and stir quickly within 60 seconds; ④ Put your hand into the clone powder liquid and keep it still for about 5 minutes (avoid touching the bottom), wait for it to solidify, then gently wiggle your arm to let air in and slowly pull your hand out; ⑤ After curing, pour it out as a whole, break off the excess material, and gently remove the hand mold; ⑥ After it has fully set, pour it out, break off the excess material, gently remove the hand mold, and trim it slightly with our tool (bamboo stick and sandpaper) for a more beautiful result

Product specifications