The PA2 provides all the processing you need between your mixer and amplifiers to optimize and protect your loudspeakers.Ethernet control via an Android, iOS, Mac, or Windows device, and updated Wizards, the PA2 continues great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation. Packing List: audio processor x1 Using Manuel x 1 Power cable x1 Analog input: Number of inputs: 2 inputs, 1 RTA microphone input Connector: 2 x XLR bus input, 1 x XLR female RTA microphone input Microphone input: electronic balance / RF filter / circuit input level: >50k Maximum input level (line input): >+ 20 dBu Common mode rejection ratio: >45dB Phantom power supply for microphone preamplifier: + 15 VDC Analog output: Number of outputs: 6-wire output Connector: XLR male plug Tpe: Electronic balance, RF filter Maximum output level: + 20 dB Quasi-delay: Up to 10 milliseconds per output channel A/D performance: A/D dynamic range: 24-bit +112dB -110dB with A/D converter with IVTM conversion system Type IV dynamic range: +123 db with transient materials, +22khz, 121 decibels (no weighted materials), 22khz 115 db standard configuration, program materials, +22khz D/A converter: 24 bits Dynamic range: +112db -110db System performance Internal processing word length: 32-bit floating point Sampling rate: 48 khz Dynamic range: +110 db -107 db THD+ noise: typical value is 0.003% + 4 dbu, 1 khz, 0 db Gain frequency response: Crosstalk between signal channels: 20 hz-20 khz, + 0 /- 0. 5 db Delay: Input and output: 1.847 milliseconds, <- 110 decibels, -120 decibels (input and output: -100 decibels) Power supplyWorking voltage: 100-120V 50/60 Hz or 220-240V AC 50/60 Hz Power consumption: 22W

Ürün özellikleri