ESP32-S3 7inch Capacitive Touch Display Development Board, ESP32 With Display, 800×480, 5-Point Touch, 32-Bit LX7 Dual-Core Processor, Up To 240MHz Frequency, Supports WiFi & Bluetooth, With Onboard Antenna ESP32-S3-Touch-LCD-7 Integrates RGB Interface LCD With 5-Point Capacitive Touch, Multiple Peripheral Interfaces Features ESP32-S3-Touch-LCD-7 is a microcontroller development board with 2.4GHz WiFi and BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 7inch capacitive touch screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and 8MB Flash Onboard 7inch capacitive touch display, 800×480 resolution, 65K color Supports capacitive touch control via I2C interface, 5-point touch with interrupt support Onboard CAN, RS485, I2C interface and TF card slot, integrates full-speed USB port Supports flexible clock, module power supply independent setting, and other control to realize low power consumption in different scenarios Application Scenarios Supports Multiple Peripherals Supports The Expansion Of Multiple Peripherals Via Sensor, CAN, RS485, And I2C Interfaces Application Example for reference only, please refer to the Package Content for the detailed part list What's On Board ESP32-S3N8R8 The SoC with WiFi and Bluetooth, up to 240MHz operating frequency, integrated 8MB PSRAM and Flash 7inch display panel connector Touch panel connector TF card slot USB Type-C port UART1 Port USB TO UART Type-C port UART2 connector UART1 and UART2 are the same UART, selected by switch Sensor header CAN header I2C header RS485 header 12. 3.7V single lithium battery PH2.0 header 13. CAN terminal resistor selection 14. RS485 terminal resistor selection 15. UART selection select UART1 or UART2 16. BOOT button Press and hold while powering on for program burning 17. RESET button 18. I2C level selection 3.3V / 5V 19. DONE Lithium battery charging completed indicator 20. CHG Lithium battery charging indicator 21. PWR Power supply indicator Outline Dimensions Resources & Services Wiki: Packing List： 1 x ESP32-S3-Touch-LCD-7 1 x HY2.0 2P to 2PIN male cable 10cm 1 x HY2.0 2P to 3PIN male cable 10cm 1 x HY2.0 2P to 4PIN male cable 10cm Acrylic Holder Case

Ürün özellikleri