OE Part Number: 10200A 10200 10369A Fit for the F ollowing M odels: 2011 (Journey, 200, 200 Convertible, Avenger, Sebring, Sebring Convertible, Challenger, Charger, 300, 300C, Charger, Magnum, Grand Caravan, Caravan, Town & Country, Durango, Grand Cherokee) - Systems (9 - Engine, 3.6L) 2012 (Journey, Wrangler, 200, 200 Convertible, Avenger, Sebring, Sebring Convertible, Challenger, Charger, 300, 300C, Charger, Magnum, Grand Caravan, Caravan, Town & Country, Durango, Grand Cherokee) - Systems (9 - Engine, 3.6L) 2013 (Ram Truck 1500, Journey, JF, Wrangler, 200, 200 Convertible, Avenger, Sebring, Sebring Convertible, Challenger, Charger, 300, 300C, Charger, Magnum, Grand Caravan, Caravan, Town & Country, Durango, Grand Cherokee) - Systems (9 - Engine, 3.6L) 2014 (Ram Truck 1500, Journey, JF, Wrangler, 200, 200 Convertible, Avenger, Sebring, Sebring Convertible, KL, Challenger, Charger, 300, 300C, Charger, Magnum, Grand Caravan, Caravan, Town & Country, VF, Durango, Grand Cherokee) - Systems (9 - Engine, 3.0L Gasoline, 9 - Engine, 3.2L, 9 - Engine, 3.6L) Note: 1. 10200A: Used as wedges to loosen the tension on the timing chains during Camshaft and phaser service procedures on 3.6L Engine. 10200-1 & 10200-3 are used on driver's side, 10200-2 is used on passenger's side. 2. 10202: Used to hold the Camshaft Phaser when performing the loosening and tightening of oil control valves during service procedures for Chrysler, Dodge 3.6 L Engine. 10202-1 is used on the right bank and 10202-2 is used on the left bank. 3. 10369A: Required to use on 2012 and newer models. Some 2011 models may also require 10369A, which depends on the size of bolt in the front cover tightening sequence on the right bank (cylinder head closest to firewall). If that bolt head is 13MM you need 10369A. Package Includes: 1 x Timing Chain Holder 10200-1 1 x Timing Chain Holder 10200-2 1 x Timing Chain Hook 10200-3 1 x Camshaft Phaser Locks Miller pn 10202-1 1 x Camshaft Phaser Locks Miller pn 10202-2 1 x Timing Chain Holder 10369A

Ürün özellikleri